Configuración

Firmware & Drivers

Firmware:
Update the firmware of the Omnis Duo to the latest available version from https://www.pioneerdj.com/en/support/software/all-in-one-system/omnis-duo/

Drivers :
Windows : Install the latest ASIO drivers from https://www.pioneerdj.com/en/support/software/all-in-one-system/omnis-duo/
Mac OS : You don't have to install this driver software. Mac OS standard driver will be automatically installed when your Omnis Duo is connected to your Mac with a USB cable.

VirtualDJ Setup

Download and install VirtualDJ from https://www.virtualdj.com/download/index.html (in case you have not done already)


Once VirtualDJ is opened, a Connect Window will appear to enter your virtualdj.com account credentials.

A Pro Infinity or a Pro Subscription License is required to fully use the Alpha Theta Omnis Duo Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.

https://www.virtualdj.com/buy/index.html

A detection windows will appear right after, verifying proper connection. Have your speakers connected to the rear-panel of the Omnis Duo and click "OMNIS DUO" for VirtualDJ to apply the pre-defined audio setup with the built-in sound card of the device. You can still change that from Settings->AUDIO tab.

Select the Software Control mode from the Omnis Duo.

1. Press the SOURCE button on the Display menu
   
2. Select the SOFTWARE CONTROL mode
   
3. Press the LOAD 1 button at the right side of the Display
   
4. Press the LOAD 2 button at the right side of the Display
   

Click to OK

The device is now ready to operate.

MIDI Operation

The device should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list. The factory default Mapping offers the functionality described in this Manual, however those can be adjusted to your needs via VDJ Script actions.



Find more details at https://www.virtualdj.com/wiki/VDJ8script.html

AUDIO Setup

The device has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that.




For further software settings please refer to the User Guides of VirtualDJ.
https://www.virtualdj.com/manuals/virtualdj8/index.html

Refer to the manual of the device for further features-settings. at... https://www.pioneerdj.com/en/support/documents/all-in-one-system/omnis-duo/