S SHIFTPress this button down to access secondary actions as described in the SHIFT ACTION column. HOLD this button to switch left or right deck between decks 1/3 and 2/4.
KEY
ACTION
SHIFT (SECONDARY) ACTION
1 CROSSFADERWhen on far left position, only sound from the left decks will be heard from the Master Output. When at far right position, only the sound of the right decks will be heard from the Master Output. In all other positions, the audio signals from left/right decks will be blend.2 VOLUMEAdjust the Volume of the decks.3 CROSSFADER ASSIGNAssign the deck to the left or right side of the crossfader.4 PFLUse these buttons to send the pre-fader audio signal of the decks to the Headphones channel for pre-listening.5 Master PFLUse this button to quickly send the Master audio signal to the Headphones channel for pre-listening.6 COLOR FX SELECTPress one of these four buttons to select one Color Effect to apply on decks. The available effects are Filter, Cut, Noise & Flanger7 COLOR FX ADJTurn these knobs to apply the selected Color Effect on the sound of the deck. When in center, the Color Effect turns off.8 BASSUse these knobs to cut/boost the frequencies of the Low/Bass Equalizer Band. No adjustment is made when the knob is at the middle/center position.9 MEDIUMUse these knobs to cut/boost the frequencies of the Middle/Medium Equalizer Band. No adjustment is made when the knob is at the middle/center position.10 TREBLEUse these knobs to cut/boost the frequencies of the High/Tremble Equalizer Band. No adjustment is made when the knob is at the middle/center position.11 GAINUse these knobs to adjust the gain of each deck.12 VUMETERThis LED bar shows the pre-fader volume level of each deck.13 LINE1/2No functions are assigned here.14 PLAY/PAUSEPress this button to start or pause the playback of the deck.Press this button to start the playback of the deck or restart it from last start point (stutter).15 CUE/STOPPress this button stop the playback of the deck and return to the last cue point. Press this button while the deck is paused to store a temporary cue point.Press this button to return to the start of the track. 16 PAD PARAMETERSUse these buttons to control the first parameter of the selected pad page.Use these buttons to control the second parameter of the selected pad page.17 VINYLUse this button to toggle the JOG between Scratch and Bending modes.18 REVERSEPress this button to toggle playback between normal (forward) and reverse direction.Press this button to apply a momentary (while pressed) reverse effect. Upon release, the track will resume forward playback direction from the point it would have been if you hadn't used the button. 19 SLIPPress this button to toggle Slip mode. While Slip mode is active, hotcues, Loops , beatjumps and scratchs have a temporary effect, and the tracks always returns to the position it would have been if those actions were never used.20 JOGTouch sensitive Jog for Scratching, or Bending.Use the JOG to seek quickly between different positions inside the track.21 PITCHAdjust the playback speed of the track.22 PITCH BENDPress these buttons to temporarily adjust the playback speed of the track (pitch bend). When you release the buttons the playback speed will return to the value dictated by the PITCH slider.Press these buttons to change the range of the pitch slider.23 KEYLOCKPress this button to lock the track's KEY to it's current value.24 Master Press this button to manually set this deck as the "MASTER" deck. Hold this button for 1 second in order to resume automatic Master deck selection.25 SYNCPress this button to sync the BPM (and pahse if the track is playing) from this deck with the "Master" deck.26 BPM MODENo function assigned here.27 QUANTIZEPress this button to toggle quantize mode. When quantize mode is enabled, Loops , hotcues and beatjumps are snaped to the beatgrid.28 SCRUBNo function assigned here.29 PAD MODEPress one of these buttons to switch the Pads to one of the available modes. The factory default modes are hotcues, auto loop, slicer & loop rollPress one of these buttons to switch the Pads to one of the available secondary modes. The factory default modes are Sampler , manual loop, beatjump & keycue. 30 Pads The 8 Pads perform various different operations depending on the selected pad mode. Please read VirtualDJ manual for more informations about Pads and the various offered pad modes.31 PHONES VOLUMETurn this knob to adjust the volume of the headphones.32 PHONES MIXTurn this knob to blend the headphones audio between the decks signal (far left) and the Master channel signal (far right)33 Master VOLUMETurn this knob to adjust the Master volume.34 Master VUMETERThis LED bar shows the post-fader level of the Master output.35 MIDIPress this button twice to switch the unit from stand alone to computer controller mode.36 SCREENBuilt in screen that shows various information about the tracks loaded on the 4 decks.37 BROWSEPress this button to load the selected track on the browser, on the first available deck if focus is on songs. If focus is on folders, press this button to return the focus on songs.Press this button to switch the browser of VirtualDJ GUI to "zoom" mode.38 PLAYLISTPress this button to show or hide the Sideview panel on VirtualDJ GUI.39 INFOPress this button to show or hide the Info panel on VirtualDJ GUI.40 VIEWSPress this button to switch between the available panels of the Sideview (Sidelist, Automix, Sampler e.t.c).41 ZOOMUse these two buttons to change the zoom of the VirtualDJ waveforms.42 LOADPress these buttons to load the selected track on the current left or right deck.43 BROWSE ENCODERUse this encoder to scroll up/down on the various lists of the browser.44 BACKPress this button to switch browser focus on the folders list. While focus is on folders list press this button to open or close subfolders.Press this button to switch focus between the three main areas of the browser (Song list, Folders list and Sideview).45 FX SOURCETurn this knob to select on which deck the effects are going to get applied.46 FX SELECTTurn this knob to select one of the available effects.47 FX PARAMETERTurn this knob to adjust the second paramter of the selected effect.48 FX DRY/WETTurn this knob to adjust the first parameter of the selected effect.49 FX ONPress this button to turn on/off the selected effect.50 FX BEATSUse these buttons to adjust the BPM timing of the selected effect (for beat-aware effects only).51 BPMAdjust the BPM of the deck that's selected as the effects deck.Fine adjust the BPM of the deck that's selected as the effects deck. 52 GRIDMove the CBG of the deck that's selected as the effects deck.Fine move the CBG of the deck that's selected as the effects deck.
For further Technical features and specifications, visit
