FRONT & REAR PANELS

Traktor Kontrol S3 - Rear panel

35 Master OUT - XLR

Use these connectors to connect your device on a PRO grade amplifier or self-powered (active) speakers. The level of this output is controlled from the Master knob at the top panel.

36 Master OUT - RCA

Use these connectors to connect your device on another mixer or consumer grade amplifier. The level of this output is controlled from the Master knob at the top panel

37 BOOTH OUT - TRS

Use these connectors to connect your device on a secondary amplifier or self-powered (active) speakers for booth monitoring. The level of this output is controlled from the BOOTH knob at the top panel

38 LINE IN D

Use these connectors to connect a line-level signal equipment.The signal of this input will be routed to the Input of the USB Audio Interface if the LINE led at the top panel is lit (via SHIFT+EXT) and can be routed to Deck D via the EXT button.

39 IOS

Not used from VirtualDJ

40 USB

Use a standard USB cable to connect Kontrol S3 with your computer.

41 DC IN

Connect the provided power supply unit. Make sure all other connections are done before connecting to power.

Traktor Kontrol S3 - Front panel

42 MIC D

Use this connector to connect your microphone . The signal of this input will be routed to the Input of the USB Audio Interface if the MIC D led at the top panel is lit (via SHIFT+EXT) and can be routed to Deck D via the EXT button.

43 PHONES 1/4" 1/8"

Use these connectors to connect your Headphones.The level of this Output is controlled from the Headphones VOL knob at the top panel.

For further Technical features and specifications, visit
NI TRAKTOR KONTROL S3
Product's Page

Hardware Integration Department 2020- ATOMIX PRODUCTIONS

Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.