MIXER CONTROLS

KEY

ACTION

1 CROSSFADER

Blends audio signals from left and right decks

2 VOLUME

Adjust Volume Output of each mixer channel

3 CUE/PFL

Send the audio signal of a Mixer Channel to the Headphones Channel

4 PC/LINE

Define the source of each Mixer Channel. Set to PC to route a VirtualDJ deck to a Mixer channel. Set to LINE to route an analogue source (connected at the rear panel)

5 EQ BASS

Adjust the Equalizer Low Band frequencies (Bass) of each mixer channel

6 EQ MID

Adjust the Equalizer Middle Band frequencies of each mixer channel

7 EQ HIGH

Adjust the Equalizer High Band frequencies (Treble) of each mixer channel

8 GAIN

Adjust the pre-fader Output level (Gain) of each mixer channel

Notes

By default the mixer of the 4 TRAK will follow the 3-1-2-4 Mixer Channel order. A different mixer order can be applied either from the Mixer Options menu (right above the Crossfader in the 4 decks default skin) or from VirtualDJ settings (MixerOrder setting in OPTIONS)

The 4TRAK is a stand-alone mixer and can operate without any software running on computer

Navegador